High strain rate characterization of thermoplastic fiber-reinforced composites under compressive loading
Experimental study on the mechanical behavior of polyphenylene sulfide (PPS)-based composite laminates reinforced with carbon and glass fibers subjected to different strain rates under compression load is reported. Quasi-static tests have been carried out using an electromechanical universal testing...
Main Authors: | Ramírez Montes, Carolina, Reis, Vitor, Opelt, Carlos, Santiago, Rafael, Almeraya Calderón, Facundo, Donadon, Mauricio V, Gaona Tiburcio, Citlalli, Croche, René, Baltazar Zamora, Miguel Ángel |
---|---|
Other Authors: | Dekoulis, George |
Format: | Sección de libro. |
Language: | English |
Published: |
Intechopen
2019
|
Subjects: | |
Online Access: | http://eprints.uanl.mx/24982/2/24982.pdf |
Similar Items

Experimental study of the influence of stitched nylon threads in glass-fiber-reinforced polymer two-dimensional multilayer composite on tensile strength
by: Lira Martínez, Manuel Alejandro, et al.
Published: (2023)
by: Lira Martínez, Manuel Alejandro, et al.
Published: (2023)

Transverse Load and Temperature Sensing Using Multiplexed Long-Period Fiber Gratings
by: Torres Gómez, Ismael, et al.
Published: (2020)
by: Torres Gómez, Ismael, et al.
Published: (2020)

Effect of the Notch-to-Depth Ratio on the Post-Cracking Behavior of Steel-Fiber-Reinforced Concrete
by: Valdez Aguilar, José Abelardo, et al.
Published: (2021)
by: Valdez Aguilar, José Abelardo, et al.
Published: (2021)

Compressive strength and microstructural evolution of metakaolin geopolymers exposed to high temperature
by: Burciaga Díaz, O., et al.
Published: (2015)
by: Burciaga Díaz, O., et al.
Published: (2015)

Delamination and tensile effect of fine z-binder reinforced on fiberglass/polyester composite for aerospace applications
by: Gaona Tiburcio, Citlalli, et al.
Published: (2023)
by: Gaona Tiburcio, Citlalli, et al.
Published: (2023)

Experimental study of the influence of stitched nylon threads in glass-fiber-reinforced polymer two-dimensional multilayer composite on tensile strength
by: Lira Martínez, Manuel Alejandro, et al.
Published: (2023)
by: Lira Martínez, Manuel Alejandro, et al.
Published: (2023)

Corrosion behavior of aluminum-carbon fiber/epoxy sandwich composite exposed on NaCl solution
by: Jáquez Muñoz, Jesús Manuel, et al.
Published: (2023)
by: Jáquez Muñoz, Jesús Manuel, et al.
Published: (2023)

Pulse quality analysis on soliton pulse compression and soliton self-frequency shift in a hollow-core photonic bandgap fiber
by: González Baquedano, N., et al.
Published: (2013)
by: González Baquedano, N., et al.
Published: (2013)

All-Fiber Laser Curvature Sensor Using an In-Fiber Modal Interferometer Based on a Double Clad Fiber and a Multimode Fiber Structure
by: Alvarez Tamayo, Ricardo Iván, et al.
Published: (2017)
by: Alvarez Tamayo, Ricardo Iván, et al.
Published: (2017)

Thermomechanical Analysis on Ti-Ni Shape Memory Helical Springs Under Cyclic Tensile Loads
by: Oliveira, Carlos Augusto do Nascimento, et al.
Published: (2015)
by: Oliveira, Carlos Augusto do Nascimento, et al.
Published: (2015)

Goethite–titania composite: disinfection mechanism under UV and visible light
by: Lara Rico, Rosalina, et al.
Published: (2019)
by: Lara Rico, Rosalina, et al.
Published: (2019)

Finite element modelling to predict reinforced concrete corrosion-induced cracking
by: Castorena González, José H., et al.
Published: (2019)
by: Castorena González, José H., et al.
Published: (2019)

Effect of Cathodic Protection on Reinforced Concrete with Fly Ash Using Electrochemical Noise
by: García Contreras, Jorge, et al.
Published: (2021)
by: García Contreras, Jorge, et al.
Published: (2021)

High performance reinforced concrete, corrosion –
resistant into aggressive industrial environments
by: Vázquez Rodríguez, Francisco Javier, et al.
Published: (2017)
by: Vázquez Rodríguez, Francisco Javier, et al.
Published: (2017)

Chemical Interactions in Reinforced Concrete Exposed at a Tropical Marine Environment
by: Mendoza Rangel, José Manuel, et al.
Published: (2015)
by: Mendoza Rangel, José Manuel, et al.
Published: (2015)

Carbon fiber recovery using subcritical and supercritical fluids for chemical recycling of thermoset composite materials
by: Morales Ibarra, Rodolfo
Published: (2014)
by: Morales Ibarra, Rodolfo
Published: (2014)

Carbon fiber recovery using subcritical and supercritical fluids for chemical recycling of thermoset composite materials
by: Morales Ibarra, Rodolfo
Published: (2014)
by: Morales Ibarra, Rodolfo
Published: (2014)

Modeling Steel Corrosion Failure in Reinforced Concrete by Cover Crack Width 3D FEM Analysis
by: Castorena González, José H., et al.
Published: (2020)
by: Castorena González, José H., et al.
Published: (2020)

System identification applied to a single area electric power system under frequency response
by: Barrios Gómez, José Ángel, et al.
Published: (2021)
by: Barrios Gómez, José Ángel, et al.
Published: (2021)

Study of corrosion mechanisms in refractory castables under the influence of liquid oxides
by: Ibarra Plata, Luis Tadeo
Published: (2020)
by: Ibarra Plata, Luis Tadeo
Published: (2020)

Characterization of Corrosion Behavior of Painted Galvanized Steel under Accelerated Conditions
by: Vázquez Rodríguez, Francisco Javier, et al.
Published: (2015)
by: Vázquez Rodríguez, Francisco Javier, et al.
Published: (2015)

Study of corrosion mechanisms in refractory castables under the influence of liquid oxides
by: Ibarra Plata, Luis Tadeo
Published: (2020)
by: Ibarra Plata, Luis Tadeo
Published: (2020)

Relationship between drying rates and mechanical properties in refractory concretes
by: García Ortiz, Laura Imelda, et al.
Published: (2023)
by: García Ortiz, Laura Imelda, et al.
Published: (2023)

Relationwship between drying rates and mechanical properties in refractory concretes
by: García Ortiz, Laura Imelda, et al.
Published: (2023)
by: García Ortiz, Laura Imelda, et al.
Published: (2023)

Comportamiento elástico y morfológico de composites polipropileno/grafeno
by: Llamas Hernández, Mayra Iveth
Published: (2014)
by: Llamas Hernández, Mayra Iveth
Published: (2014)

Comportamiento elástico y morfológico de composites polipropileno/grafeno
by: Llamas Hernández, Mayra Iveth
Published: (2014)
by: Llamas Hernández, Mayra Iveth
Published: (2014)

Identifying factors influencing the corrosion rate of steel using nonparametric statistics
by: Nieves Mendoza, Demetrio, et al.
Published: (2012)
by: Nieves Mendoza, Demetrio, et al.
Published: (2012)

Cavity-rate analysis applied to the frequency oscillations relaxation in a self-pulsed large-mode-area ytterbium-doped fiber laser.
by: Toral Acosta, Daniel, et al.
Published: (2015)
by: Toral Acosta, Daniel, et al.
Published: (2015)

MgO–ZrO2 Ceramic Composites for Silicomanganese Production
by: Gómez Rodríguez, Cristian, et al.
Published: (2022)
by: Gómez Rodríguez, Cristian, et al.
Published: (2022)

Corrosion Behavior of AISI 1018 Carbon Steel in Localized Repairs of Mortars with Alkaline Cements and Engineered Cementitious Composites
by: Maldonado Bandala, Erick, et al.
Published: (2020)
by: Maldonado Bandala, Erick, et al.
Published: (2020)

Fatiga de metales con cargas de amplitud variable por el método de Strain-Life
by: García Villarreal, Jaime de Jesús
Published: (1990)
by: García Villarreal, Jaime de Jesús
Published: (1990)

Fatiga de metales con cargas de amplitud variable por el método de Strain-Life
by: García Villarreal, Jaime de Jesús
Published: (1990)
by: García Villarreal, Jaime de Jesús
Published: (1990)

Sources of antibiotics pollutants in the aquatic environment under SARS-CoV-2 pandemic situation
by: Sosa Hernández, Juan Eduardo, et al.
Published: (2021)
by: Sosa Hernández, Juan Eduardo, et al.
Published: (2021)

SmFeTaO Photocatalyst for Degradation of Indigo Carmine Dye under Solar Light Irradiation
by: Torres Martínez, Leticia Myriam, et al.
Published: (2012)
by: Torres Martínez, Leticia Myriam, et al.
Published: (2012)

Change in Nasal Airflow, Associated with the Treatment of Rapid Maxillary Expansion in Children with Maxillary Compression
by: Torre Martínez, Hilda Hortencia Hermelinda, et al.
Published: (2019)
by: Torre Martínez, Hilda Hortencia Hermelinda, et al.
Published: (2019)

Correction to: CuO coatings on glass fibers: a hybrid material for CO2 adsorption and photocatalytic reduction to solar fuels
by: Avila López, Manuel Alejandro, et al.
Published: (2021)
by: Avila López, Manuel Alejandro, et al.
Published: (2021)

Facile synthesis of visible-light-driven Cu2O/BiVO4 composites for the photomineralization of recalcitrant pesticides
by: Aguilera Ruiz, Eduardo, et al.
Published: (2017)
by: Aguilera Ruiz, Eduardo, et al.
Published: (2017)

Synthesis of carbon nanotubes on surface of recovered carbon fibers by chemical vapor deposition, as a sizing process to obtain a hybrid material
by: García Montes, Saida Mayela
Published: (2017)
by: García Montes, Saida Mayela
Published: (2017)

Synthesis of carbon nanotubes on surface of recovered carbon fibers by chemical vapor deposition, as a sizing process to obtain a hybrid material
by: García Montes, Saida Mayela
Published: (2017)
by: García Montes, Saida Mayela
Published: (2017)

Supercritical CO2 Foaming of Thermoplastic Materials Derived from Maize: Proof-of-Concept Use in Mammalian Cell Culture Applications
by: Zheng, Jie, et al.
Published: (2015)
by: Zheng, Jie, et al.
Published: (2015)
Similar Items
-
Experimental study of the influence of stitched nylon threads in glass-fiber-reinforced polymer two-dimensional multilayer composite on tensile strength
by: Lira Martínez, Manuel Alejandro, et al.
Published: (2023) -
Transverse Load and Temperature Sensing Using Multiplexed Long-Period Fiber Gratings
by: Torres Gómez, Ismael, et al.
Published: (2020) -
Effect of the Notch-to-Depth Ratio on the Post-Cracking Behavior of Steel-Fiber-Reinforced Concrete
by: Valdez Aguilar, José Abelardo, et al.
Published: (2021) -
Compressive strength and microstructural evolution of metakaolin geopolymers exposed to high temperature
by: Burciaga Díaz, O., et al.
Published: (2015) -
Delamination and tensile effect of fine z-binder reinforced on fiberglass/polyester composite for aerospace applications
by: Gaona Tiburcio, Citlalli, et al.
Published: (2023)