Microstructural Development in a TRIP-780 Steel Joined by Friction Stir Welding (FSW): Quantitative Evaluations and Comparisons with EBSD Predictions
The present work describes the effect of FSW on the result microstructure in the stir zone (SZ), thermo-mechanically affected zone (TMAZ), heat affected zone (HAZ) and base metal (BM) of a TRIP-780 steel. X-ray diffraction (XRD), optical microscopy (OM) and EBSD were used for determinations retaine...
Autores principales: | Medina, Gladys Perez, Ferreira, Hugo Lopez, Robledo, Patricia Zambrano, Pérez, Argelia Miranda, Valdés, Felipe A. Reyes |
---|---|
Formato: | Artículo |
Lenguaje: | inglés |
Publicado: |
2016
|
Acceso en línea: | http://eprints.uanl.mx/14815/1/42.pdf |
Ejemplares similares

Thermo-mechanic and Microstructural Analysis of an Underwater Welding Joint
por: Hernández Gutiérrez, Pedro, et al.
Publicado: (2016)
por: Hernández Gutiérrez, Pedro, et al.
Publicado: (2016)

Soldabilidad y mecanismos de transformaciones de fase en uniones de aceros avanzados de alta resistencia martensíticos y trip por los procesos láser y fsw
por: Pérez Medina, Gladys Yerania
Publicado: (2012)
por: Pérez Medina, Gladys Yerania
Publicado: (2012)

Soldabilidad y mecanismos de transformaciones de fase en uniones de aceros avanzados de alta resistencia martensíticos y trip por los procesos láser y fsw
por: Pérez Medina, Gladys Yerania
Publicado: (2012)
por: Pérez Medina, Gladys Yerania
Publicado: (2012)

Experimental characterisation of dry friction isolators for shock and vibration
por: Tapia González, Pablo Ernesto, et al.
Publicado: (2017)
por: Tapia González, Pablo Ernesto, et al.
Publicado: (2017)

Integridad estructural de un acero TRIP800 soldado mediante procesos láser CO2 y GMAW
por: Pérez Medina, Gladys Yerania, et al.
Publicado: (2010)
por: Pérez Medina, Gladys Yerania, et al.
Publicado: (2010)

A Learning Evaluation for an Immersive Virtual Laboratory for Technical Training applied into a Welding Workshop
por: Torres, Francisco, et al.
Publicado: (2016)
por: Torres, Francisco, et al.
Publicado: (2016)

Influence of the roughening method, joint configuration and adhesive thickness on the shear strength of ferritic stainless steel surfaces joined by methyl methacrylate
por: Cruz González, Celso E., et al.
Publicado: (2018)
por: Cruz González, Celso E., et al.
Publicado: (2018)

A Study of the Corrosion Behavior of AHSS Complex-Phase CP
780 Employing an Electrochemical Noise Technique Analyzed by
Different Methods
por: Lara Banda, María del Refugio, et al.
Publicado: (2025)
por: Lara Banda, María del Refugio, et al.
Publicado: (2025)

Detection of Turner Syndrome by Quantitative
PCR of SHOX and VAMP7 Genes
por: Ibarra Ramírez, Marisol, et al.
Publicado: (2015)
por: Ibarra Ramírez, Marisol, et al.
Publicado: (2015)

Electrochemical Reactivation of AISI 409 Ferritic Stainless Steel Sheet Welded by Laser Process with application in aeronautical
por: C. Ramírez-López, M
Publicado: (2017)
por: C. Ramírez-López, M
Publicado: (2017)

Análisis de texturas de una aleación de aluminio ALCu5Mg (206) mediante la técnica EBSD
por: López Galindo, Diana Lucía
Publicado: (2012)
por: López Galindo, Diana Lucía
Publicado: (2012)

Análisis de texturas de una aleación de aluminio ALCu5Mg (206) mediante la técnica EBSD
por: López Galindo, Diana Lucía
Publicado: (2012)
por: López Galindo, Diana Lucía
Publicado: (2012)

Occurrence and quantitative microbial risk assessment of Cryptosporidium and Giardia in soil and air samples
por: Balderrama Carmona, Ana Paola, et al.
Publicado: (2014)
por: Balderrama Carmona, Ana Paola, et al.
Publicado: (2014)

Quantitative Aspect of Leucophyllum frutescens Fraction before and after Encapsulation in Polymeric Nanoparticles
por: Martínez Rivas, Claudia Janeth, et al.
Publicado: (2017)
por: Martínez Rivas, Claudia Janeth, et al.
Publicado: (2017)

Efectos microestructurales en un acero sometido a un tratamiento térmico TRIP
por: Covarrubias Alvarado, Octavio
Publicado: (2002)
por: Covarrubias Alvarado, Octavio
Publicado: (2002)

Efectos microestructurales en un acero sometido a un tratamiento térmico TRIP
por: Covarrubias Alvarado, Octavio
Publicado: (2002)
por: Covarrubias Alvarado, Octavio
Publicado: (2002)

Development and validation of the coach's task presentation scale: A quantitative self-report instrument
por: Tristán Rodríguez, José Leandro, et al.
Publicado: (2016)
por: Tristán Rodríguez, José Leandro, et al.
Publicado: (2016)

Quantitative trait loci mapping of genome regions controlling permethrin resistance in the mosquito Aedes aegypti.
por: Saavedra Rodríguez, Karla Lizet, et al.
Publicado: (2008)
por: Saavedra Rodríguez, Karla Lizet, et al.
Publicado: (2008)

Spatial Microstructural Ordering of Expansive Clay Minerals
por: López Lara, T., et al.
Publicado: (2018)
por: López Lara, T., et al.
Publicado: (2018)

Predictive factors of alcohol and tobacco use in adolescents
por: Alvarez Aguirre, Alicia, et al.
Publicado: (2014)
por: Alvarez Aguirre, Alicia, et al.
Publicado: (2014)

Facile synthesis of low band gap ZnO Microstructures
por: Ovando Medina, V. M., et al.
Publicado: (2018)
por: Ovando Medina, V. M., et al.
Publicado: (2018)

Prediction of the Wine Price Purchased Using Classification Trees
por: Wise Lozano, Jorge A., et al.
Publicado: (2022)
por: Wise Lozano, Jorge A., et al.
Publicado: (2022)

Voriconazole MICs are predictive for the outcome of experimental disseminated scedosporiosis
por: Martin Vicente, Adela, et al.
Publicado: (2016)
por: Martin Vicente, Adela, et al.
Publicado: (2016)

Followee recommendation in twitter using fuzzy link prediction.
por: Rodríguez Aldape, Fernando Manuel, et al.
Publicado: (2016)
por: Rodríguez Aldape, Fernando Manuel, et al.
Publicado: (2016)

Resilience does not predict academic performance in gross anatomy
por: Elizondo Omaña, Rodrigo Enrique, et al.
Publicado: (2011)
por: Elizondo Omaña, Rodrigo Enrique, et al.
Publicado: (2011)

Followee recommendation in Twitter using fuzzy link prediction
por: Rodríguez Aldape, Fernando Manuel, et al.
Publicado: (2016)
por: Rodríguez Aldape, Fernando Manuel, et al.
Publicado: (2016)

Effects of Heat Treatment on Morphology, Texture, and Mechanical Properties of a MnSiAl Multiphase Steel with TRIP Behavior
por: Salinas, Alvaro, et al.
Publicado: (2018)
por: Salinas, Alvaro, et al.
Publicado: (2018)

The influence of untreated sugarcane bagasse ash on the microstructural and mechanical properties of mortars
por: Maldonado García, M. A., et al.
Publicado: (2018)
por: Maldonado García, M. A., et al.
Publicado: (2018)

Compressive strength and microstructural evolution of metakaolin geopolymers exposed to high temperature
por: Burciaga Díaz, O., et al.
Publicado: (2015)
por: Burciaga Díaz, O., et al.
Publicado: (2015)

Situational and Dispositional Factors that Predict Motivation: a Multilevel Study
por: Pineda Espejel, Heriberto Antonio, et al.
Publicado: (2017)
por: Pineda Espejel, Heriberto Antonio, et al.
Publicado: (2017)

Back to the basics: usefulness of naturally aged mouse models and immunohistochemical and quantitative morphologic methods in studying mechanisms of lung aging and associated diseases
por: Jaramillo Rangel, Gilberto, et al.
Publicado: (2023)
por: Jaramillo Rangel, Gilberto, et al.
Publicado: (2023)

Finite element modelling to predict reinforced concrete corrosion-induced cracking
por: Castorena González, José H., et al.
Publicado: (2019)
por: Castorena González, José H., et al.
Publicado: (2019)

Structural, microstructural and electrical properties of vitrium-doped barium titanate for multilayer
CERAMIC CAPACITORS
por: Hernández López, Ana María
Publicado: (2018)
por: Hernández López, Ana María
Publicado: (2018)

Structural, microstructural and electrical properties of vitrium-doped barium titanate for multilayer
CERAMIC CAPACITORS
por: Hernández López, Ana María
Publicado: (2018)
por: Hernández López, Ana María
Publicado: (2018)

Microstructure Modeling of a Ni-Fe-Based Superalloy During the Rotary Forging Process
por: Loyda, A., et al.
Publicado: (2016)
por: Loyda, A., et al.
Publicado: (2016)

Predicting the phase diagram of two-dimensional colloidal systems with long-range interactions
por: Mejía Rosales, Sergio, et al.
Publicado: (2006)
por: Mejía Rosales, Sergio, et al.
Publicado: (2006)

Effect of Spun Velocities and Composition on the Microstructure and Transformation Temperatures of TiNi Shape Memory Ribbons
por: López Cuéllar, Enrique Manuel, et al.
Publicado: (2016)
por: López Cuéllar, Enrique Manuel, et al.
Publicado: (2016)

Tailoring the microstructure and tribological properties in commercially pure aluminium processed by High Pressure Torsion Extrusion
por: Sergejev, F., et al.
Publicado: (2021)
por: Sergejev, F., et al.
Publicado: (2021)

Sperm motility in baseline spermogram is predictive of total motile sperm after preparation for insemination
por: Ayala A., F., et al.
Publicado: (2007)
por: Ayala A., F., et al.
Publicado: (2007)

Development of a Theoretical Model That Predicts Optothermal Energy Conversion of Gold Metallic Nanoparticles
por: Rafiei, Nahid, et al.
Publicado: (2020)
por: Rafiei, Nahid, et al.
Publicado: (2020)
Ejemplares similares
-
Thermo-mechanic and Microstructural Analysis of an Underwater Welding Joint
por: Hernández Gutiérrez, Pedro, et al.
Publicado: (2016) -
Soldabilidad y mecanismos de transformaciones de fase en uniones de aceros avanzados de alta resistencia martensíticos y trip por los procesos láser y fsw
por: Pérez Medina, Gladys Yerania
Publicado: (2012) -
Soldabilidad y mecanismos de transformaciones de fase en uniones de aceros avanzados de alta resistencia martensíticos y trip por los procesos láser y fsw
por: Pérez Medina, Gladys Yerania
Publicado: (2012) -
Experimental characterisation of dry friction isolators for shock and vibration
por: Tapia González, Pablo Ernesto, et al.
Publicado: (2017) -
Integridad estructural de un acero TRIP800 soldado mediante procesos láser CO2 y GMAW
por: Pérez Medina, Gladys Yerania, et al.
Publicado: (2010)