Effect of Spun Velocities and Composition on the Microstructure and Transformation Temperatures of TiNi Shape Memory Ribbons
Ti‒50.13Ni and Ti‒49.62Ni (at.%) shape memory alloy ribbons were fabricated by melt-spinning method at different circumferential wheel velocities. The effects of wheel velocity, chemical composition and heat treatments on microstructure and Transformation temperature were investigated. Differences i...
Main Authors: | López Cuéllar, Enrique Manuel, López Pavón, Luis Alberto, Nuñez Mendoza, Esaú, Araújo, Carlos José de, Castro, Walman Benicio De, González, Cezar Henrique, Otubo, Jorge |
---|---|
Format: | Article |
Language: | English |
Published: |
2016
|
Subjects: | |
Online Access: | http://eprints.uanl.mx/14761/1/11.pdf |
Similar Items

Effect of Spun Velocities and Composition on the R‒phase and Thermomechanical Behavior in Ti‒Ni Ribbons Electrically Heated
by: Cuéllar, Enrique López, et al.
Published: (2016)
by: Cuéllar, Enrique López, et al.
Published: (2016)

Thermomechanical Analysis on Ti-Ni Shape Memory Helical Springs Under Cyclic Tensile Loads
by: Oliveira, Carlos Augusto do Nascimento, et al.
Published: (2015)
by: Oliveira, Carlos Augusto do Nascimento, et al.
Published: (2015)

Nanoparticles from Cu-Zn-Al shape memory alloys physically synthesized by ion milling deposition
by: López Pavón, Luis Alberto, et al.
Published: (2012)
by: López Pavón, Luis Alberto, et al.
Published: (2012)

Thermomechanical Characterization and Modeling of NiTi Shape Memory Alloy Coil Spring
by: Puente Córdova, Jesús Gabino, et al.
Published: (2023)
by: Puente Córdova, Jesús Gabino, et al.
Published: (2023)

Compressive strength and microstructural evolution of metakaolin geopolymers exposed to high temperature
by: Burciaga Díaz, O., et al.
Published: (2015)
by: Burciaga Díaz, O., et al.
Published: (2015)

Transformation Temperatures and Electrochemical behavior of Polycrystalline Fe-Doped Ni-Mn-Ga and Co-Ni-Ga Alloys
by: Sanchez Carrillo, M.
Published: (2018)
by: Sanchez Carrillo, M.
Published: (2018)

Recrystallization of a Ti-45Ni-5Cu cold-worked shape memory alloy characterized by thermoelectric power and electrical properties
by: Soto Parra, Daniel Enrique, et al.
Published: (2014)
by: Soto Parra, Daniel Enrique, et al.
Published: (2014)

Nanomaterial properties: size and shape dependencies
by: Guisbiers, Grégory, et al.
Published: (2012)
by: Guisbiers, Grégory, et al.
Published: (2012)

Nanomaterial Properties: Size and Shape Dependencies
by: Guisbiers, Grégory, et al.
Published: (2012)
by: Guisbiers, Grégory, et al.
Published: (2012)

Microwave-assisted synthesis and characterization of microstar shaped zinc oxide
by: Gómez, Idalia, et al.
Published: (2012)
by: Gómez, Idalia, et al.
Published: (2012)

Microwave-assisted synthesis and characterization of microstar shaped zinc oxide
by: Palomar Pérez, Flor Esthela, et al.
Published: (2012)
by: Palomar Pérez, Flor Esthela, et al.
Published: (2012)

Differential protection in power transformers using the statistical second central moment
by: Esponda Hernández, Héctor, et al.
Published: (2018)
by: Esponda Hernández, Héctor, et al.
Published: (2018)

Spatial Microstructural Ordering of Expansive Clay Minerals
by: López Lara, T., et al.
Published: (2018)
by: López Lara, T., et al.
Published: (2018)

Assimilative Memory, or How to Attend and Never Forget
by: Larrowe, Marcus Dwight
Published: (2015)
by: Larrowe, Marcus Dwight
Published: (2015)

A Real-Time SOSM Super-Twisting Technique for a Compound DC Motor Velocity Controller
by: Morfin, Onofre A., et al.
Published: (2017)
by: Morfin, Onofre A., et al.
Published: (2017)

Biosíntesis de un bionanocompósito de titanio-níquel (TiNi) y dióxido de titanio (TiO₂) con perspectivas de aplicación en biomateriales.
by: Reyes Chávez, Luis Raúl
Published: (2013)
by: Reyes Chávez, Luis Raúl
Published: (2013)

Biosíntesis de un bionanocompósito de titanio-níquel (TiNi) y dióxido de titanio (TiO₂) con perspectivas de aplicación en biomateriales.
by: Reyes Chávez, Luis Raúl
Published: (2013)
by: Reyes Chávez, Luis Raúl
Published: (2013)

Pharyngeal mucosal closure in total laryngectomy: comparison between vertical and T-shaped closure
by: Montemayor Alatorre, Adolfo, et al.
Published: (2024)
by: Montemayor Alatorre, Adolfo, et al.
Published: (2024)

Thermo-mechanic and Microstructural Analysis of an Underwater Welding Joint
by: Hernández Gutiérrez, Pedro, et al.
Published: (2016)
by: Hernández Gutiérrez, Pedro, et al.
Published: (2016)

Exhaled Breath Temperature Measurement in Allergic Respiratory Disease
by: Villarreal González, Rosalaura Virginia, et al.
Published: (2019)
by: Villarreal González, Rosalaura Virginia, et al.
Published: (2019)

Odor Memory Stability after Reinnervation of the Olfactory Bulb
by: Ravel, Nadine, et al.
Published: (2012)
by: Ravel, Nadine, et al.
Published: (2012)

Structural transformation of tungsten oxide nanourchins into IF–WS2 nanoparticles: an aberration corrected STEM study
by: Deepak, Francis Leonard, et al.
Published: (2011)
by: Deepak, Francis Leonard, et al.
Published: (2011)

Arcing faults characterization using wavelet transform with special focus on auto-reclosure of transmission lines
by: Jäger, Johann, et al.
Published: (2007)
by: Jäger, Johann, et al.
Published: (2007)

Design Implication of a Distribution Transformer in Solar Power Plants Based on Its Harmonic Profile
by: Macías Ruiz, Iván Rafael, et al.
Published: (2021)
by: Macías Ruiz, Iván Rafael, et al.
Published: (2021)

Parameter Studies on High-Velocity Oxy-Fuel Spraying of CoNiCrAlY Coatings Used in the Aeronautical Industry
by: Cabral Miramontes, José Ángel, et al.
Published: (2014)
by: Cabral Miramontes, José Ángel, et al.
Published: (2014)

Influence of capping on the atomistic arrangement in palladium nanoparticles at room temperature
by: Corthey, Gastón, et al.
Published: (2014)
by: Corthey, Gastón, et al.
Published: (2014)

Facile synthesis of low band gap ZnO Microstructures
by: Ovando Medina, V. M., et al.
Published: (2018)
by: Ovando Medina, V. M., et al.
Published: (2018)

Shaping the online public debate: The relationship between the news framing of the expropriation of YPF and readers’ comments
by: Muñiz, Carlos, et al.
Published: (2015)
by: Muñiz, Carlos, et al.
Published: (2015)

Effect of temperature on AuPd nanoparticles produced by inert gas condensation
by: Pérez Tijerina, Eduardo, et al.
Published: (2010)
by: Pérez Tijerina, Eduardo, et al.
Published: (2010)

The influence of untreated sugarcane bagasse ash on the microstructural and mechanical properties of mortars
by: Maldonado García, M. A., et al.
Published: (2018)
by: Maldonado García, M. A., et al.
Published: (2018)

High-temperature oxidation of superalloy C-263 of rings for aircraft engines
by: Gaona Tiburcio, Citlalli, et al.
Published: (2018)
by: Gaona Tiburcio, Citlalli, et al.
Published: (2018)

Differences between clicker and voice when used as event markers in shaping novel behaviors in dog training
by: González Ramírez, Mónica Teresa, et al.
Published: (2017)
by: González Ramírez, Mónica Teresa, et al.
Published: (2017)

Comparison of Exhaled Breath Fraction Temperature (frEBT) in Patients with Respiratory Allergy
by: Guzmán Avilán, Rosa Ivett, et al.
Published: (2018)
by: Guzmán Avilán, Rosa Ivett, et al.
Published: (2018)

Transverse Load and Temperature Sensing Using Multiplexed Long-Period Fiber Gratings
by: Torres Gómez, Ismael, et al.
Published: (2020)
by: Torres Gómez, Ismael, et al.
Published: (2020)

Structural, microstructural and electrical properties of vitrium-doped barium titanate for multilayer
CERAMIC CAPACITORS
by: Hernández López, Ana María
Published: (2018)
by: Hernández López, Ana María
Published: (2018)

Physicochemical changes and resistant-starch content of extruded cornstarch with and without storage at refrigerator temperatures
by: Neder Suárez, David, et al.
Published: (2016)
by: Neder Suárez, David, et al.
Published: (2016)

Structural, microstructural and electrical properties of vitrium-doped barium titanate for multilayer
CERAMIC CAPACITORS
by: Hernández López, Ana María
Published: (2018)
by: Hernández López, Ana María
Published: (2018)

Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures
by: Lara Padilla, Hernán, et al.
Published: (2017)
by: Lara Padilla, Hernán, et al.
Published: (2017)

Microstructure Modeling of a Ni-Fe-Based Superalloy During the Rotary Forging Process
by: Loyda, A., et al.
Published: (2016)
by: Loyda, A., et al.
Published: (2016)

Memories sur l'agriculture, les instrumens aratoires et d'economie rurale
by: Valcourt, L.P. de
Published: (2015)
by: Valcourt, L.P. de
Published: (2015)
Similar Items
-
Effect of Spun Velocities and Composition on the R‒phase and Thermomechanical Behavior in Ti‒Ni Ribbons Electrically Heated
by: Cuéllar, Enrique López, et al.
Published: (2016) -
Thermomechanical Analysis on Ti-Ni Shape Memory Helical Springs Under Cyclic Tensile Loads
by: Oliveira, Carlos Augusto do Nascimento, et al.
Published: (2015) -
Nanoparticles from Cu-Zn-Al shape memory alloys physically synthesized by ion milling deposition
by: López Pavón, Luis Alberto, et al.
Published: (2012) -
Thermomechanical Characterization and Modeling of NiTi Shape Memory Alloy Coil Spring
by: Puente Córdova, Jesús Gabino, et al.
Published: (2023) -
Compressive strength and microstructural evolution of metakaolin geopolymers exposed to high temperature
by: Burciaga Díaz, O., et al.
Published: (2015)