Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures
Abstract: The combination of different materials and capabilities to manufacture at several scales open new possibilities in scaffold design for bone regeneration. This work is focused on bimodal scaffolds that combine polylactic acid (PLA) melt extruded strands with polycaprolactone (PCL) electrosp...
Autores principales: | , , , , |
---|---|
Formato: | Artículo |
Lenguaje: | inglés |
Publicado: |
2017
|
Acceso en línea: | http://eprints.uanl.mx/17591/1/377.pdf |
_version_ | 1824414946304196608 |
---|---|
author | Lara Padilla, Hernán Mendoza Buenrostro, Christian Cardenas, Diego Rodríguez García, Aída Rodríguez González, Ciro Ángel |
author_facet | Lara Padilla, Hernán Mendoza Buenrostro, Christian Cardenas, Diego Rodríguez García, Aída Rodríguez González, Ciro Ángel |
author_sort | Lara Padilla, Hernán |
collection | Repositorio Institucional |
description | Abstract: The combination of different materials and capabilities to manufacture at several scales open new possibilities in scaffold design for bone regeneration. This work is focused on bimodal scaffolds that combine polylactic acid (PLA) melt extruded strands with polycaprolactone (PCL) electrospun fibers. This type of bimodal scaffold offers better mechanical properties, compared to the use of PCL for the extruded strands, and provides potential a means for controlled drug and/or growthfactordeliverythroughtheelectrospunfibers. Thetechnologiesoffuseddepositionmodeling (FDM) and electrospinning were combined to create 3D bimodal constructs. The system uses a controlled cooling system allowing the combination of polymers with different melting temperatures to generate integrated scaffold architecture. The thermoplastic polymers used in the FDM process enhance the mechanical properties of the bimodal scaffold and control the pore structure. Integrated layers of electrospun microfibers induce an increase of the surface area for cell culture purposes, as well as potential in situ controlled drug and/or growth factor delivery. The proposed bimodal scaffolds (PLA extruded strands and PCL electrospun fibers) show appropriate morphology and better mechanical properties when compared to the use of PCL extruded strands. On average, bimodal scaffolds with overall dimensions of 30×30×2.4 mm3 (strand diameter of 0.5 mm, strand stepover of 2.5 mm, pore size of 2 mm, and layer height of 0.3 mm) showed scaffold stiffness of 23.73 MPa and compression strength of 3.85 MPa. A cytotoxicity assay based human fibroblasts showed viability of the scaffold materials.
Keywords: tissue engineering; bone; bimodal scaffolds; fused deposition modeling; electrospinning; hybrid manufacturing process |
format | Article |
id | eprints-17591 |
institution | UANL |
language | English |
publishDate | 2017 |
record_format | eprints |
spelling | eprints-175912020-05-21T17:43:42Z http://eprints.uanl.mx/17591/ Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures Lara Padilla, Hernán Mendoza Buenrostro, Christian Cardenas, Diego Rodríguez García, Aída Rodríguez González, Ciro Ángel Abstract: The combination of different materials and capabilities to manufacture at several scales open new possibilities in scaffold design for bone regeneration. This work is focused on bimodal scaffolds that combine polylactic acid (PLA) melt extruded strands with polycaprolactone (PCL) electrospun fibers. This type of bimodal scaffold offers better mechanical properties, compared to the use of PCL for the extruded strands, and provides potential a means for controlled drug and/or growthfactordeliverythroughtheelectrospunfibers. Thetechnologiesoffuseddepositionmodeling (FDM) and electrospinning were combined to create 3D bimodal constructs. The system uses a controlled cooling system allowing the combination of polymers with different melting temperatures to generate integrated scaffold architecture. The thermoplastic polymers used in the FDM process enhance the mechanical properties of the bimodal scaffold and control the pore structure. Integrated layers of electrospun microfibers induce an increase of the surface area for cell culture purposes, as well as potential in situ controlled drug and/or growth factor delivery. The proposed bimodal scaffolds (PLA extruded strands and PCL electrospun fibers) show appropriate morphology and better mechanical properties when compared to the use of PCL extruded strands. On average, bimodal scaffolds with overall dimensions of 30×30×2.4 mm3 (strand diameter of 0.5 mm, strand stepover of 2.5 mm, pore size of 2 mm, and layer height of 0.3 mm) showed scaffold stiffness of 23.73 MPa and compression strength of 3.85 MPa. A cytotoxicity assay based human fibroblasts showed viability of the scaffold materials. Keywords: tissue engineering; bone; bimodal scaffolds; fused deposition modeling; electrospinning; hybrid manufacturing process 2017-06-11 Article PeerReviewed text en cc_by_nc_nd http://eprints.uanl.mx/17591/1/377.pdf http://eprints.uanl.mx/17591/1.haspreviewThumbnailVersion/377.pdf Lara Padilla, Hernán y Mendoza Buenrostro, Christian y Cardenas, Diego y Rodríguez García, Aída y Rodríguez González, Ciro Ángel (2017) Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures. Materials, 10 (6). pp. 1-16. ISSN 1996-1944 http://doi.org/10.3390/ma10060640 doi:10.3390/ma10060640 |
spellingShingle | Lara Padilla, Hernán Mendoza Buenrostro, Christian Cardenas, Diego Rodríguez García, Aída Rodríguez González, Ciro Ángel Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures |
thumbnail | https://rediab.uanl.mx/themes/sandal5/images/online.png |
title | Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures |
title_full | Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures |
title_fullStr | Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures |
title_full_unstemmed | Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures |
title_short | Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures |
title_sort | influence of controlled cooling in bimodal scaffold fabrication using polymers with different melting temperatures |
url | http://eprints.uanl.mx/17591/1/377.pdf |
work_keys_str_mv | AT larapadillahernan influenceofcontrolledcoolinginbimodalscaffoldfabricationusingpolymerswithdifferentmeltingtemperatures AT mendozabuenrostrochristian influenceofcontrolledcoolinginbimodalscaffoldfabricationusingpolymerswithdifferentmeltingtemperatures AT cardenasdiego influenceofcontrolledcoolinginbimodalscaffoldfabricationusingpolymerswithdifferentmeltingtemperatures AT rodriguezgarciaaida influenceofcontrolledcoolinginbimodalscaffoldfabricationusingpolymerswithdifferentmeltingtemperatures AT rodriguezgonzalezciroangel influenceofcontrolledcoolinginbimodalscaffoldfabricationusingpolymerswithdifferentmeltingtemperatures |